Free pallet calculator & configurator · No sign-up · Live diagrams

Pallet Calculator & Optimizer

Work out how many cartons fit on each pallet, how many pallets your shipment needs, what every loaded pallet weighs and what the freight will be billed at. Left side: your inputs. Right side: the numbers — with to-scale layer diagrams, billable weight and packaging cost built in.

Carton & Pallet Inputs

Measurement:
Try:
1,200 mm pallet length800 mm width

Top view — one layer (4 cartons)

150300

Side view — 4 levels

Pallet Stack Optimization

Your Optimised Pallet Results
Cartons Available500
Cartons per level4
Cartons level x (along pallet length)2
Cartons level y (across pallet width)2
No of levels z4
Maximum Cartons per pallet16
Pallets Required32
≈ Weight (Full Pallet)180 kg
≈ Height (carton stack)1,200 mm
≈ Build Height (incl. pallet deck)1,350 mm
  • You will use 32 pallets; 31 will be fully loaded with 16 cartons each, the last one carries 4.

Total shipment weight

5,640 kg

500 cartons + pallets

Layer footprint utilization

100%

1,200×800 deck

Volume utilization

100%

vs 1,200×800×1,350

Billable Weight (dim-weight)

Total volume

36.000 m³

1271.3 cu ft

Volumetric weight

6,000 kg

÷ 6,000 cm³/kg

Gross weight

5,640 kg

cargo + pallets

Billable weight

6,000 kg

volumetric governs

Packaging Cost Estimate

Pallets cost

$480.00

Consumables

$96.00

Total packaging

$576.00

Freight per pallet

—

All-in landed cost per carton: $1.152 (packaging + freight ÷ 500 cartons)

Send the plan to your warehouse or freight forwarder.

Results are estimates for planning only. Verify pallet condition, load stability and carrier height limits before building.

Logistics-grade defaults: fifteen standard pallet platforms, the 1620 mm air-freight build limit and industry dim-weight divisors are pre-loaded — the same caveats freight forwarders apply when they quote your shipment.

⚡Quick answers people search for most

Common box-on-pallet builds computed with the same engine that powers the tool above — open the calculator and swap in your own numbers.

📦

400×600×300 mm · 10 kg · 500 cartons on 1200×800

25 pallets

The classic EUR-pallet build: 4 cartons per layer, 5 layers high — 25 pallets move the whole order.

🇺🇸

16×12×12 in · 25 lb · 240 cartons on 48×40 (GMA)

8 pallets · 6/layer

North-American GMA pallet: 6 cartons per layer, 4 layers — a textbook grocery DC build.

🧊

300×300×200 mm chilled goods with 20 mm airflow gaps

12 pallets

Cold-chain loads need air gaps — spacing shrinks each layer and adds layers fast.

⚖️

How tall can a pallet build go?

1620 mm

1620 mm total is the classic air-freight lower-deck limit. Road and sea builds can go higher — mind the fork-lift and rack clearances.

🚢

Pallets in a 40 ft container?

24–30

A 40' standard takes ~24 EU pallets single-stacked (30 with the pinwheel trick); a 40' HQ double-stacks short builds.

🧮

Pallet load efficiency formula

footprint ÷ deck

Layer efficiency = carton footprint ÷ pallet deck area. Rotate or mix orientations to push it past 90% before adding a second SKU.

✨Beyond the basics: integrated load-planning tools

Everything the shipping workflow needs after the carton count — the pallet configurator handles multiple box sizes, container fit, billable weight, spacing, slip sheets, costs and cylindrical loads.

🧮Pallet calculation formulas, exactly as computed

No black boxes — the optimizer runs these equations on every keystroke. The layer diagrams are drawn from the same row counts that build the live top-view and side-elevation diagrams of your pallet.

Cartons per layer (two orientations)

A: x = ⌊PL / CL⌋ · y = ⌊PW / CW⌋
B: x = ⌊PL / CW⌋ · y = ⌊PW / CL⌋
layer = max(xA·yA, xB·yB)

Try both footprint orientations and keep the better one — rotating a carton 90° routinely gains 20–50% per layer. Exact mode adds a mixed-strip pass: dedicate some rows to orientation A and the remaining strip to B, which is how warehouse teams actually build pinwheel-style layers.

Layers, pallets and weights

z = round((Hmax − Hpallet) / CH) (classic, stackable) · 1 (non-stackable)
per pallet = layer × z
pallets = ⌈cartons ÷ per pallet⌉
full pallet ≈ per pallet × kg + pallet kg

The deck eats into the budget: a 1620 mm build limit minus a 150 mm pallet deck leaves 1470 mm of net stacking height. Classic mode rounds the layer count to the nearest whole layer; Exact mode floors it so the physical build can never exceed the limit. Billable weight then takes the greater of gross weight and volumetric weight: CBM × 1,000,000 ÷ divisor.

Why two answers can both be right. Classic tools round rows to the nearest carton — handy for quick quoting, but on decks that don't divide cleanly it implies an overhang your warehouse cannot build. When the two modes disagree, trust Exact mode for the build sheet and Classic mode for capacity planning; the gap between them is your negotiation room with the freight forwarder.

📐Standard pallet sizes in the calculator

Fifteen industry platforms, from half-pallets to 48×48 display bases — the same palette freight forwarders quote against.

Pallet typeLengthWidthDeck areaCommon use
600x1000600 mm1000 mm0.60 m²Half pallet — retail floors & DSD
889x1156889 mm1156 mm1.03 m²General industrial & export
914x914914 mm914 mm0.84 m²General industrial & export
1016x10161016 mm1016 mm1.03 m²General industrial & export
1016x12191016 mm1219 mm1.24 m²General industrial & export
1067x10671067 mm1067 mm1.14 m²General industrial & export
1118x11181118 mm1118 mm1.25 m²General industrial & export
1200x8001200 mm800 mm0.96 m²EUR / UK standard — European road & export
1200x11001200 mm1100 mm1.32 m²Common in Asia-Pacific chemical & pharma
1219x5081219 mm508 mm0.62 m²48×20 half-pallet — narrow aisles
1219x9141219 mm914 mm1.11 m²General industrial & export
1219x10161219 mm1016 mm1.24 m²48×40 GMA — North-American grocery & retail
1219x10671219 mm1067 mm1.30 m²General industrial & export
1219x11431219 mm1143 mm1.39 m²General industrial & export
1219x12191219 mm1219 mm1.49 m²48×48 — drum & display base

Which pallet should you pick? Match the destination, not the origin: a 48×40 GMA pallet arriving in Europe may not fit local racking (EU beams assume 1200×800), and EUR pallets booked into US LTL networks get re-stacked at a premium. When in doubt, run the same carton against two platforms — the calculator's per-pallet count tells you instantly which one ships cheaper.

📝How to use the free box on pallet calculator

Eight steps from a tape measure and a carton to a full build sheet your warehouse can execute — the same workflow a load planner runs, in cm or inches.

1

Pick your unit of measurement

Switch between millimeters and inches at the top of the form. Every field converts live — enter cartons in inches against a metric pallet size without pre-converting anything. Working in cm? A centimeter value is simply ×10 in mm, so a 40 × 30 cm box becomes 400 × 300 mm.

2

Enter the carton dimensions

Width, length and height of a single carton as it ships. Measure the actual packed box, not the product — void fill and shrink wrap add real millimeters that decide whether a row fits.

3

Enter the per-carton weight

Gross weight per carton in kg or lb. This drives the full-pallet weight approximation, the shipment total and the gross side of the billable-weight calculation.

4

Enter the number of cartons

The total quantity for the shipment. The optimizer divides it into full pallets plus a final part-loaded pallet and warns you when a different pallet size wastes space.

5

Choose the pallet type

Fifteen standard platforms from 600×1000 half-pallets to 48×48 displays, matching the sizes used by freight forwarders worldwide. The default 1200×800 (EUR/UK) suits most export lanes.

6

Open Advanced for bespoke builds

Industry defaults are pre-loaded — stackable freight, 1620 mm max build height, a 20 kg pallet weighing 150 mm tall. Override any of them, add clearance gaps for cold-chain or fragile freight, insert slip sheets, or switch the optimizer to Exact mode for zero-overhang rows.

7

Read the results, then the diagrams

Cartons per layer (x rows by y rows), number of levels z, maximum cartons per pallet, pallets required, full-pallet weight and stack height — with a to-scale top view of one layer and a side view of the stack.

8

Send the numbers downstream

Feed the build height and gross weight into the container-loading calculator to see how many pallets fit your box or trailer, and into the billable-weight panel to estimate air-freight charges before you book.

🧪Worked example: 500 cartons of 400×600×300 mm on EUR pallets

Every number below comes from the same transparent math the calculator runs — a real mid-size export order.

The math, step by step

  1. Deck check, orientation A: 1200 ÷ 600 = 2 cartons along the pallet length, 800 ÷ 400 = 2 across → 4 per layer.
  2. Orientation B (rotated): 1200 ÷ 400 = 3, but 800 ÷ 600 = 1 → only 3 per layer. Orientation A wins, so rows run x = 2, y = 2.
  3. Layers: 1620 mm limit − 150 mm pallet deck = 1470 mm net; 1470 ÷ 300 = 4.9 → 5 levels (z). Exact mode floors it to 4 layers so the finished build stays under the limit at 1350 mm.
  4. Per pallet: 4 × 5 = 20 cartons.
  5. Pallets: 500 ÷ 20 = 25 pallets, every one fully loaded — no part-load to consolidate.
  6. Weights: full pallet ≈ 20 × 10 kg + 20 kg pallet = 220 kg; the shipment totals 5,200 kg including all 25 decks.
  7. Freight checks: 25 EUR-pallet footprints fill a 40' container past its floor (24 fit straight), so the lane quotes 2 × 20' or one 40' HC with a shorter rebuild — billable weight at the sea divisor stays gross-based at ~5.2 t.

Calculator output for this example

Cartons per level

4 (x=2, y=2)

orientation A wins

Levels z

5

1620 mm ÷ 300 mm carton

Max per pallet

20

4 × 5

Pallets required

25

all fully loaded

≈ Full pallet weight

220 kg

cartons + 20 kg pallet

≈ Stack height

1500 mm

1650 mm with the deck

🎓About the Methodology & Expert Review

How the numbers on this site are produced, checked and kept honest.

Calculations on this site are verified against GMA (Grocery Manufacturers Association) and EPAL (European Pallet Association) pallet specifications, including the 1200 × 800 EUR footprint, the 48 × 40 in GMA footprint and the deck-height conventions used for warehouse racking and trailer clearance. The stacking formula divides cargo net height (maximum build height minus pallet deck height) by carton height, and every layout is checked against both footprint orientations before the best fit is reported.

Designed by logistics and programmatic SEO engineers to assist Amazon FBA sellers, 3PL warehouses and freight forwarders, the tooling is reviewed each time a carrier height limit, container specification or pallet standard changes — most recently for the 2026 high-cube and 53 ft trailer interior figures.

✓

Standards-checked output

Layer fits respect EPAL deck tolerances and GMA load-face conventions; overhang is reported, never hidden.

✓

Conservative by design

Counts assume uniform rows, square pallet placement and intact decks — the numbers you can book against, not best cases.

✓

Reviewed for freight reality

Weight caps, dim-weight divisors and container payloads follow published carrier and ISO equipment limits.

✓

Transparent formulas

Every result can be reproduced by hand from the formulas published on this page — no black-box optimization.

❓Frequently Asked Questions

The palletizing and freight questions we get most often — answered with the same formulas the calculator runs.

Can I use this pallet calculator with cm measurements?

+
Yes — the unit selector offers metric millimeters and inches; a centimeter value is simply ×10 in mm, so a 40 × 30 cm carton becomes 400 × 300 mm. Every field, result and diagram converts live, so you can plan a metric shipment without touching inches, and weights toggle between kg and lb. Pallet sizes stay in their native mm — the 1200×800 EUR deck, for example, is 120 × 80 cm.

Does this pallet calculator include a 3D view?

+
The configurator draws two live, to-scale diagrams that together give you the complete three-dimensional picture of the build: a top view of one layer showing every carton's orientation and spacing, and a side elevation of the full stack including the pallet deck. Both redraw on every keystroke as you adjust gaps, setbacks or interlayers — more practical for handing warehouse staff a build instruction than a static render.

How do I calculate how many cartons fit on a pallet?

+
Split the pallet deck into rows. Along the pallet length you fit floor(pallet length ÷ carton length) cartons, and across the width floor(pallet width ÷ carton width) — the product is one layer. Rotate the carton 90° and repeat; keep whichever orientation fits more. Then multiply by the number of layers: floor(max build height ÷ carton height). This calculator automates all of it, tries both orientations on every keystroke, and flags the better one in the results table as level x and level y.

What is the standard pallet size?

+
It depends on the trade lane. The 1200×800 mm EUR/UK pallet dominates European road freight; the 1219×1016 mm (48×40 in) GMA pallet is the North-American default; Australia runs the 1165×1165 mm export pallet; Asia commonly uses 1100×1100 mm. The calculator ships with all fifteen industry-standard sizes preloaded, and the results note exactly which platform your build is based on so you can sanity-check before ordering pallets.

How many EUR pallets fit in a 40 ft container?

+
A 40 ft standard container's floor is 12035 × 2352 mm. Straight-loading 1200×800 pallets two-abreast gives 24 (12 rows of 2); the well-known 'pinwheel' arrangement squeezes in 30 by mixing orientations around the container edges; and with a 40' High Cube, builds under ~1190 mm can be double-stacked for up to 60. Use the container-loading calculator to test your exact build height and weight against each equipment type, including 53 ft domestic trailers.

What does 'cartons per level x and y' mean in the results?

+
Level x is the number of carton rows placed along the pallet's length and level y is the rows across its width — so a result of x = 2, y = 2 on a 1200×800 pallet with 600×400 cartons means 2 + 2 rows = 4 cartons per layer. The top-view diagram draws exactly that arrangement to scale, so you can hand it to warehouse staff as a build instruction.

Why does the calculator show a height of 1500 mm when my cartons stack to 1650 mm?

+
The classic build reports the carton-stack height only — the levels-z figure multiplied by carton height — mirroring how freight forwarders quote 'pallet height'. Your physical build adds the pallet deck (typically 143–150 mm) on top, which is why the output panel also shows the build height including the deck. Check both against your carrier's limit: air-freight lower-deck builds are usually capped at 1620 mm total, while road and sea can run 1800–2200 mm.

What is the difference between Classic and Exact optimizer modes?

+
Classic mode rounds rows to the nearest whole carton, matching the traditional industry tools — it is optimistic and can overhang the deck by a few centimeters when the numbers don't divide cleanly. Exact mode floor-fits every row (no overhang, ever), adds a mixed-orientation strip pass that beats both uniform layouts, and reserves the pallet deck height before stacking. Compare the two lines 'Cartons per level' and 'exact-fit per layer' to see what the honest number is for your build.

How is volumetric (dimensional) weight calculated?

+
Carriers charge by whichever is greater: real weight or the space the freight occupies. Volumetric weight = volume (cm³) ÷ divisor, where the divisor encodes the mode's density assumption — 6000 cm³/kg for IATA air freight (1 CBM = 167 kg), 5000 for express couriers (1 CBM = 200 kg), 3000 for European road, 1000 for sea. The output panel computes your shipment's CBM, applies the divisor you pick, and shows the billable weight next to the gross weight so you can pre-cost the lane.

Should I allow double stacking on my pallets?

+
Only if the cartons and their contents can bear the load. Stackable freight roughly halves the pallet count and container space versus non-stackable freight, and non-stackable builds also lose the top deck of every racking bay. If in doubt, add slip sheets between layers — they distribute the load and cost pennies. The Advanced panel lets you turn stacking off to price both scenarios.

How do I add gaps between cartons for cold-chain or fragile goods?

+
Open the Advanced panel and set 'Carton gap (sides)' and 'Gap between layers'. The optimizer shrinks each carton's effective footprint by the gap and re-runs the layout, while the top-view diagram redraws with the spacing visible. Typical values: 10–20 mm air gaps for chilled airflow, 5–10 mm cushioning allowance for fragile cartons, and a 25–50 mm pallet setback so loads cannot overhang in transit.

Can I calculate multiple box sizes on one pallet?

+
Yes — that is what the mixed-SKU palletizing calculator is for. Enter each box size's dimensions, weight and quantity, and it packs the different carton sizes layer by layer onto shared pallets, reporting each pallet's layer composition, weight and height utilization. It is designed for e-commerce combo shipments and store-mixed orders where single-SKU pallets would waste half the deck.

How accurate are the weight approximations?

+
The full-pallet weight is exact arithmetic for the reported build: cartons per pallet × carton weight + pallet weight (plus slip sheets if enabled). The shipment total also accounts for the part-loaded last pallet. Real-world variance comes from moisture in timber pallets (a '20 kg' pallet can weigh 25–30 kg wet), film and strapping, so treat the totals as planning figures and weigh one finished pallet to calibrate.

Is this pallet calculator free — and does it work as a box on pallet calculator?

+
Yes — every calculator on the site runs entirely in your browser with no sign-up, no limits and no data sent anywhere. As a box on pallet calculator it takes a single box's dimensions, weight and quantity, then reports cartons per layer, layers and pallets required. The container loading, mixed-SKU palletizing, material yield and cylinder packing tools all share the same engine, so numbers are consistent as you move a shipment from carton plan to container plan to cost estimate.

🧮More Calculators

Purpose-built solvers for the rest of the load-planning workflow — containers, mixed SKUs, sheet goods and cylindrical loads, all free and browser-based.

📖More Guides

Field-tested palletizing and shipping methods — the knowledge behind every number the calculators produce.