Pallet Making · Sheet goods & kerf

Plywood & Material Yield Calculator

Enter a sheet size, your saw's kerf and the pallet cut list — deck boards, bottom boards, stringers, edge boards — and see sheets required, per-component yield, waste percentage and a to-scale cutting diagram before the first blade tooth touches the panel.

✓ Kerf-aware grid cutting✓ As-is vs rotated auto-picked✓ Sheets, m², yield & waste✓ To-scale SVG diagram✓ Free · runs in your browser

Sheet & cut settings

Kerf is the sawdust the blade removes — one blade-width per cut. Standard circular-saw blades run ≈ 3 mm; thin-kerf blades ≈ 2 mm.

Components — your cut list

Width × length in mm and quantity per pallet / batch. 4/8 rows used.

1
2
3
4

Results — sheets, yield & waste

4
Sheets required
1.5
Component area m²
11.91
Sheet area m²
12.6%
Overall yield
87.4%
Waste
ComponentSize (mm)QtyPer sheetSheetsCutYield
Top deck board100 × 1,200723 rotated12392.7%
Bottom board100 × 1,200323 rotated12392.7%
Stringer38 × 1,200359 rotated15990.4%
Edge board100 × 800233 as-is13388.7%

Cutting diagram — one sheet, first component

offcut 74100 × 1,2002,440 mm1,220 mmkerf 3 mm

One 2,440 × 1,220 mm sheet: 23 pieces of Top deck board per sheet, cut rotated with 3 mm kerf seams shown to scale. Dashed areas are offcuts. Change the first component's dimensions to diagram other parts.

Cutting advice

  • →3 components (“Top deck board”, “Bottom board”, “Stringer”) fit more pieces per sheet rotated 90° — the engine already cuts them in that orientation.
  • →The plan cuts 123 spare pieces beyond the quantities entered — keep them as spares, or cut the smallest component from these offcut strips before opening another sheet.
  • →Overall waste is 87.4% because every component gets its own full sheet. Batch larger quantities so whole sheets are consumed, or cut two components per sheet in the workshop.

All math runs in your browser — nothing is sent or stored.

🪚Who runs yield math on sheet goods

Any shop that builds pallets with plywood, OSB or panel decks buys material by the sheet but sells pallets by the unit — and the gap between those two units is exactly where profit lives or dies. A pallet manufacturer quoting 500 pallets needs to know whether each pallet consumes 3.2 sheets or 4.1 sheets of 18 mm ply, because at €35–60 per panel that difference is thousands of euros across the run. Yield math converts the cut list on the drawing into a purchase order: pieces per sheet, sheets per pallet, waste percentage, and how both orientations of every part change the count.

Crating and export packing shops feel the same pressure in shorter bursts. A rush order for twelve heavy-duty crates means cutting decks, cleats and edge boards tonight against whatever stock is on the rack — and the question “do I have enough sheet for this?” has a precise answer once kerf is included. Packing shops that skip the math either over-buy (cash tied up in half-used panels leaning on the rack) or under-buy (a second trip to the merchant while the truck waits).

Smaller workshops, farms and maintenance teams face the third version of the problem: paying full sheet prices for half-sheet demand. For them, yield math is a buying decision — is the 2440 × 1220 mm panel, the 1830 × 915 mm six-by-three, or the slightly dearer 2500 × 1250 mm sheet the one that leaves usable offcuts instead of firewood? The calculator below answers all three jobs with the same numbers.

🏭

Pallet manufacturers

Shops building sheet-deck pallets quote jobs per pallet, and the quotation is only as good as the sheet count behind it. Yield math turns a drawing into a purchase order: seven top boards, three bottom boards and three stringers become a known number of 2440 × 1220 mm panels per pallet, at a known waste percentage.

📦

Crating & export packing shops

Case and crate builders cut decks, cleats and edge boards in short runs against urgent shipping dates. A kerf-aware cut plan is the difference between one sheet and two for a rush order — and between quoting a fixed crate price and eating the offcuts yourself.

🔨

Workshops & farm builders

Small buyers pay full sheet prices for half-sheet demand. Running the yield numbers before driving to the builders merchant shows whether a 2440 × 1220 mm panel, a 1830 × 915 mm six-by-three, or a slightly larger 2500 × 1250 mm sheet leaves you with usable stock instead of firewood.

📐Kerf: the millimetres that decide the count

Kerf is the width of the channel a saw blade cuts — the material it removes and turns to dust. It sounds trivial until you count cuts: a sheet giving up 23 deck boards needs 22 guillotine passes, and at a 3 mm kerf that is 66 mm of panel gone before any edge trim or handling damage. On a pitch-tight layout, those 66 mm are the difference between 23 boards and 22 — one board in twenty, every single sheet.

That is why every division in this calculator carries the kerf: a piece effectively occupies its own length plus one kerf. The formula for one orientation is pieces = ⌊(sheet width + kerf) / (piece width + kerf)⌋ × ⌊(sheet length + kerf) / (piece length + kerf)⌋, tested both as-is and rotated with the better count kept. Adding kerf to the numerator too is a deliberate detail — it forgives the final cut, whose kerf falls outside the last piece rather than between two pieces, so the count matches what a careful operator actually achieves.

BladeTypical kerfWhere it shows up
Thin-kerf TCT circular blade (140–190 mm)≈ 1.8 – 2.2 mmBattery and trim saws; less sawdust, slightly weaker cut
Standard circular saw blade (190–235 mm)≈ 2.8 – 3.2 mmThe default 3 mm assumption fits most site and workshop saws
Table / panel-sizing blade (250–315 mm)≈ 3.0 – 3.5 mmRipping deck boards in volume; check the blade label
Hand saw≈ 1.5 – 2.0 mmOne-off repairs only — the count rarely matters at that volume

Not sure what your saw removes? Cut two lines into scrap exactly 100 mm apart, measure the strip between them, and subtract: 97 mm between the lines means a 3 mm kerf. Enter it once and every count on this page becomes honest.

📋Sheet goods reference for pallet building

Pallet decks, panels and boards are cut from a short list of standard formats. The 2440 × 1220 mm eight-by-four is the workhorse — at 18 mm it is the default deck for reusable pallets and box pallets, and its proportions suit the 1200 mm long components used on EUR and 1200 × 1000 footprints. The smaller 6′ × 3′ and 7′ × 3′ formats exist to reduce waste on short runs and narrow pallets; the calculator's preset buttons match all three so you can compare sheet counts before you compare prices.

MaterialStandard sizeCommon thicknessAreaTypical pallet use
Softwood / hardwood plywood2440 × 1220 mm (8′ × 4′)12 / 15 / 18 mm2.98 m²Top and bottom decks, box-pallet panels — the default pallet sheet
Plywood, 6′ × 3′1830 × 915 mm12 / 15 / 18 mm1.67 m²Repair decks, half-pallets, display and one-way pallets
Plywood, 7′ × 3′2135 × 915 mm12 / 15 / 18 mm1.95 m²Deck boards for 1200 × 800 EUR-style pallets with less trim
OSB2440 × 1220 mm11 / 15 / 18 mm2.98 m²One-way and export pallet decks; strong in both grain directions
MDF / particleboard2440 × 1220 mm12 / 16 / 18 mm2.98 m²Interior crating only — swells with moisture, avoid export decks
Sawn timberStock lengths: 3.0 / 3.6 / 4.8 m38 × 100, 22 × 100 mm—Stringers, bearers and ledgers — cut from length stock, not sheets

Thickness guidance in one line: 12 mm suits light one-way decks and drawer-style crating; 15 mm covers general pallet decking; 18 mm is the reusable, heavy-duty and export standard that resists fork-heel damage. Note that timber stringers are not cut from sheets at all — they come from stock lengths, which is why the cut list separates components freely and the engine treats every row on its own sheet. And for export work: plywood and OSB count as processed wood under ISPM 15, so they cross borders without heat-treatment stamping that solid timber components require.

🧭How to use the material yield calculator

1

Pick the sheet format

Enter the sheet length and width in millimetres, or tap a preset: 2440 × 1220 mm plywood, 1830 × 915 mm or 2135 × 915 mm. If your supplier trims sheets, enter the trimmed size — a 5 mm shortfall on the length can cost a whole column of parts.

2

Set the kerf

Enter your blade's kerf in millimetres. The 3 mm default matches a standard circular-saw blade; thin-kerf blades run near 2 mm. The engine adds kerf to every piece pitch, so the count drops as the kerf grows — never leave it at zero unless you are slicing with a knife.

3

Build the cut list

List each pallet component with its width, length and the quantity you need per pallet or per batch — deck boards, bottom boards, stringers, edge boards. Up to eight rows; name them so the results table and cutting diagram stay readable.

4

Read the per-component results

Each row reports how many pieces fit on one sheet in the better orientation (as-is or rotated), how many whole sheets that demand, how many pieces get cut, and the yield percentage of that component on its own sheet.

5

Check the totals

The totals panel sums the sheets to buy, the component area in m², the sheet area those sheets represent, and the overall yield and waste percentages. That is your material budget for the job — compare it against the timber price per sheet.

6

Act on the advice and the diagram

The advice column flags rotation gains, surplus pieces, kerf assumptions and high-waste layouts. The cutting diagram draws one sheet to scale with the first component's grid, kerf seams and offcut strips, so the saw operator can set a stop and repeat the layout.

Everything recomputes live. Change a sheet preset, nudge the kerf or edit one quantity and the table, totals, diagram and advice re-render instantly — so you can race three sheet formats against each other in under a minute and buy the one that yields best.

Material yield questions, answered

How many 1200 × 100 mm deck boards come out of one 2440 × 1220 mm plywood sheet?+

Twenty-three, if you rotate the board 90°. Placed as-is, the sheet carries ⌊2443/1203⌋ = 2 boards along its length × ⌊1223/103⌋ = 11 rows across its width — 22 boards. Rotated, the 2440 mm length takes ⌊2443/103⌋ = 23 boards in a single row while the 1200 mm board length fits across the 1220 mm width. The calculator tests both orientations for every component and reports the winner, with the 3 mm kerf already inside every division.

What is kerf and how much should I allow?+

Kerf is the strip of material the blade turns into sawdust — its width, not its length. Every cut removes roughly one blade-width of sheet, so 23 boards need 22 cuts and around 66 mm of the sheet disappears before any edge trim. A standard 190–235 mm circular-saw blade cuts a 2.8–3.2 mm kerf (the 3 mm default is a safe bet), thin-kerf battery saws run closer to 2 mm, and workshop table or beam saws can reach 3.5 mm. When in doubt, make two cuts on scrap exactly 100 mm apart, measure the offcut strip, and the missing width is your true kerf.

Does the calculator nest different components onto shared sheets?+

No — deliberately. Each component is fitted on its own full sheet with a simple guillotine-style grid, which is the layout a two-person pallet shop can set up with a stop block and repeat all day. Mixed nesting (top decks plus stringer offcuts on one panel) saves a further 5–15% of material but needs cut-optimization software and a beam saw to execute reliably. The practical middle ground is in the advice column: check the surplus-piece counts and cut your smallest component from the offcut strips of a larger component's sheet before opening another one.

Why is the overall yield lower than each component's own yield?+

Because sheets are not shared between components. Each row's yield measures how tightly that one part fills its own sheet — often 85–95%. The overall figure divides the total part area by the area of every sheet opened, so rounding each component up to whole sheets adds partial-sheet waste that no single row shows. If every row looks good but the overall number looks bad, the fix is volume: build in quantities that consume whole sheets, or deliberately batch two components per sheet on the shop floor.

Which sheet size wastes the least for pallet building?+

For the 1200 mm long boards used on EUR and 1200 × 1000 pallets, a 2440 × 1220 mm sheet is nearly ideal — two board-lengths span the width with 20 mm to spare, so waste concentrates in narrow strips. Moving to 2500 × 1250 mm adds pieces on pitch-bound rows: 100 mm boards go from 23 to 24 per sheet and 38 mm stringers from 59 to 61, which matters at volume. The 1830 × 915 mm six-by-three sheet is worth pricing for small repair decks — 44% less sheet than the eight-by-four, which can beat a half-used big panel. Always allow 5–10 mm of trim for torn or chip-out edges before finalising counts.

Can I enter dimensions in inches?+

The engine works in millimetres, so convert first: one inch is exactly 25.4 mm. The common US sheet of 48 × 96 in is 1219 × 2440 mm — within a millimetre of the 2440 × 1220 mm preset, so the presets are safe to use. UK stock converts the same way: a 4 × 1 in board is roughly 100 × 25 mm, while the standard pallet stringer section is 38 × 100 mm (1.5 × 4 in). Enter the converted millimetres into the width and length fields; quantities and kerf stay as they are.

Does grain direction matter when cutting pallet panels from sheet goods?+

Less than with solid timber. Plywood and OSB are cross-banded, so they carry load in both directions and can be cut either way without a strength penalty — which is exactly why the calculator is free to rotate pieces for a better fit. Face quality matters more than direction: keep the smoother sanded face up on pallets that carry visible or fragile goods. Two caveats: solid-sawn timber stringers must keep their grain running along the length, and for export shipments plywood and OSB count as processed wood and are exempt from ISPM 15 heat-treatment stamping — one reason export packers pay the plywood premium over solid timber decks.

Know the sheet count before the saw spins

Set your sheet, kerf and cut list once — the yield, waste and offcut picture updates on every keystroke.

🪚 Run the calculator